Temporary interference error
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Examiner › Temporary interference error
TEMPORARY INTERFERENCE ERROR
The diagnostic equipment signals the following error: C1506 Temporary interference
This error is signalled if the control unit detects interference or incorrect signals at one or more of the wheel sensors.
| Results of the tests | ||||
| 1 | ELECTRICAL CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
Check that there is no interference at the system wiring. In particular, check that there are no:
Sources of electromagnetic waves, such as cell phones Also check that there are no faults at the wiring | Continue to Step 2 | Wiring faulty | Renew the wiring | |
| Accessories fitted in the after market that are creating interference | Electromangetically insulate the components that have been incorrectly fitted. If this is not possible, advise the customer to have these components removed. | |||
| The error was caused by electromagnetic waves. | Continue to Step 2 | |||
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
Delete the errors using the diagnostic equipment. Carry out an engine starting cycle to make the control unit check whether there are still errors present and check that the fault is no longer present using the Examiner | End of diagnosis | |||
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Stilo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.