1024 crankshaft and flywheel – main bearings
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- 10 engine › 1024 crankshaft and flywheel – main bearings
‹ Prev 1024 crankshaft and flywheel – main bearing capsNext › 1028 pistons and connecting rods – big end bearings
Manufacturing data and tolerances1024 crankshaft and flywheel – main bearings
1024 CRANKSHAFT AND FLYWHEEL – MAIN BEARINGS
| Half-bearing thickness (mm) | Validity | 
| ||
|---|---|---|---|---|
| Category B | Category C | Class A | ||
| 1.836 ÷ 1.844 | 1.843 ÷ 1.849 | 1.831 ÷ 1.837 | 1.8 16v 1.9 JTD 8v 1.9 JTD 16v | |
| Thrust half-ring thickness (mm) | Validity | |||
| 2.469 - 2.485 | 2.4 20v | |||
‹ Prev 1024 crankshaft and flywheel – main bearing capsNext › 1028 pistons and connecting rods – big end bearings
Parts & tools for this job For 2001 Fiat Stilo
- PARTEngine gasket setSearch: Fiat Stilo 2001 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.