Instrument panel not working
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- On-board instruments › Instrument panel not working
Fault diagnosisInstrument panel not working
INSTRUMENT PANEL NOT WORKING
With the ignition on, the warning lights are not timed and the instruments are not working with the engine running;
the instrument panel is completely switched off.
| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | ||
|---|---|---|---|---|
| 1 | CHECK USING DIAGNOSTIC EQUIPMENT | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Connect the Examiner diagnostic equipment to the diagnostic connector check the following at the instrument panel node:in errors ambient
| Move on to Step | 1. Presence of faults | 1. Continue following the instructions in the diagnostic table | |
| 2. It is impossible to establish a dialogue with the instrument panel node | Move on to Step | |||
| 2 | ELECTRICAL SYSTEM CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Remove the instrument panel and check for the supply positives and panel earth (Wiring Diagram ) E4010 INSTRUMENT PANEL | Move on to Step | No positive/earth | Restore the correct connections / supplies (Wiring Diagram ) E4010 INSTRUMENT PANEL | |
| 3 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | Fault persists | Replace instrument panel | ||
Parts & tools for this job For 2002 Lancia Thesis
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Lancia Thesis
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.