Rocker shaft - refit (page 3 of 3)
- Make
- Land Rover
- Model
- Engines 300Tdi Engine
- Section
- ROCKER SHAFT
ENGINE
16
OVERHAUL
18. Check sealing washers for damage or
distortion, replace as necessary.
19. Position a new gasket - dry to rocker cover.
20. Position rocker cover to cylinder head, fit 3
flange nuts and working from centre outwards,
tighten to 10 Nm.
21. Lubricate a new ’O’ ring with engine oil and fit
to crankcase breather cyclone unit.
22. Fit cyclone unit to rocker cover, fit bolt and
tighten to 9 Nm.
23. Connect breather hoses to cyclone unit, rocker
cover and cylinder block.
Parts & tools for this job For Land Rover Engines
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Land Rover Engines
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.