300Tdi Defender
ELECTRICAL
9
REPAIR
ALARM SOUNDER RELAY
Service repair no - 86.77.09
Remove
1. Remove screw and lift off LH door check strap
cover.
2. Remove 3 screws and lower wiper motor cover
from fascia bulkhead, (on RH drive models first
remove grab handle).
3. Slide relay multi-plug from retaining bracket and
remove relay.
Refit
4. Secure multi-plug to mounting bracket and fit
new relay.
5. Position wiper motor cover and secure with 3
screws.
6. On RH drive models fit grab handle.
7. Fit door check strap and secure with screw.
ANTI-THEFT ALARM INDICATOR LIGHT
Service repair no - 86.45.61
Remove
1. Remove LH front seat cushion.
2. Release retaing clip and remove battery access
cover.
3. Slacken battery negative lead clamp bolt.
4. Turn starter switch ’on’.
5. Turn starter switch ’off’ and remove key.
6. Disconnect battery negative lead.
NOTE: Operation 6 needs to be carried out
within 15 seconds to avoid activating
battery backed-up alarm sounder, if fitted.
NOTE: If an alarm sounder without battery
back-up is fitted, it is not necessary to
disconnect battery.
7. Remove steering wheel
See STEERING,
Repair, Steering wheel.
8. Remove 4 screws securing instrument panel to
fascia cowl.
9. Pull instrument panel away from fascia and
disconnect speedometer cable, if necessary.
10. Disconnect alarm indicator light plug lead.
11. Press in retaining lugs and withdraw indicator
light from fascia panel.