300Tdi Defender
ELECTRICAL
15
REPAIR
REAR NUMBER PLATE LAMP - BULB RENEWAL
Service repair no - 86.40.85
Remove
1. Remove single screw securing lamp cover and
lens to bulb holder.
2. Remove bulb/s from holder.
Refit
3. Fit new bulb/s.
4. Fit lamp lens and cover.
REAR NUMBER PLATE LAMP
Service repair no - 86.40.86
Remove
1. Remove single screw and remove lamp cover
and lens.
2. Uncsrew 2 fixings and remove metal cover to
gain access to lamp fixings and harness leads
inside vehicle.
3. Disconnect lamp leads from harness.
4. Remove 2 bolts, nuts and washers securing
lamp to vehicle body.
5. Remove bulb holder, complete with rubber seal
and mounting plinth.
Refit
6. Feed lamp unit leads through vehicle body and
secure bulb holder, seal and plinth.
7. Fit lamp leads to harness connectors.
8. Fit cover to conceal lamp fixings.
9. Fit lens and lamp cover.