300Tdi Defender
ELECTRICAL
19
REPAIR
INSTRUMENT ILLUMINATION - BULB RENEWAL
Service repair no - 86.45.49 - Speedometer
Service repair no - 86.45.51 - Temperature gauge
Service repair no - 86.45.52 - Fuel gauge
Remove
1. Disconnect battery.
2. Remove 4 screws retaining instrument panel.
3. Ease panel forward and disconnect
speedometer cable to improve access to
illumination bulbs.
4. Twist bulb holder and pull from socket.
5. Pull bulb from holder.
Refit
6. Fit new bulb and refit holder.
7. Reconnect speedometer cable and fit instrument
panel.
8. Reconnect battery.
STARTER SWITCH
Service repair no - 86.65.03
Remove
1. Remove instrument panel
See INSTRUMENTS,
Repair, Instrument panel.
2. Remove steering column nacelle
See
STEERING, Repair, Steering column nacelle.
3. Note position of harness leads on back of starter
switch and disconnect lukars. If fitted, remove
alarm system passive coil from switch
See
Passive coil.
4. Remove single screw and withdraw starter
switch from steering column lock.
Refit
5. Fit new switch in steering column lock.
6. Connect harness leads to starter switch.
7. If applicable, fit alarm system passive coil
See
Passive coil.
8. Fit steering column nacelle
See STEERING,
Repair, Steering column nacelle.
9. Fit instrument panel
See INSTRUMENTS,
Repair, Instrument panel.