Discovery II
DOORS
REPAIRS
76-1-5
Glass - front or rear door
$% 76.31.01
Remove
1. Remove door trim casing.
2. Carefully release water shedder from door.
3. Front door glass only: Remove exterior door
mirror.
4. Remove inner waist seal.
Front door shown, rear door similar
5. Remove 2 clips securing ends of outer waist
seal.
6. Remove outer waist seal.
7. Remove 2 bolts securing glass to regulator. If
necessary, lower glass to access bolts.
8. Remove bolts securing frame to door.
9. Remove door frame complete with glass.
10. Slide out and remove glass from frame.
Refit
1. Fit glass to frame.
2. Position frame to door and tighten bolts
securing front door frame to 10 Nm (7 lbf.ft) and
bolts securing rear door frame to 22 Nm (16
lbf.ft).
3. Secure regulator to glass with bolts and tighten
to 6 Nm (4.4 lbf.ft).
4. Fit inner and outer waist seal and secure with
clips.
5. Front door glass only: Fit exterior door mirror.
6. Fit water shedder to door.
7. Fit door trim casing.