landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Cooling system - Td5 > < Engine - V8|Page 75
Page 71
background image

GENERAL DATA

04-8

Fuel system - Td5

Fuel system - V8

Type

Direct injection from pressure regulated supply with cooled return flow 
and in-line pressure regulator

Pressure regulator setting

4 bar (58 lbf.in

2

)

Pump

Electric two stage submersible

Pump output:

 Low pressure

30 l/h (6.6 gal/h) (7.93 US gal/h) at 0.5 bar (7.25 lbf.in

2

)

 High pressure

180 l/h (39.6 gal/h) (47.55 US gal/h) at 4 bar (58 lbf.in

2

)

Maximum consumption

30 l/h (6.6 gal/h) (7.93 US gal/h)

Injectors Make/type

Lucas EV1/Dual stage

Injector operating pressures:

Pre EU3 models

 Initial opening pressure

270 bar (3915 lbf.in

2

)

 Fully opened pressure

440 bar (6380 lbf.in

2

)

 Maximum pressure

1560 bar (22620 lbf.in

2

)

EU3 models:

 Initial opening pressure

270 bar (3915 lbf.in

2

)

 Fully opened pressure

440 bar (6380 lbf.in

2

)

 Maximum pressure

1750 bar (25375 lbf.in

2

)

Filter

In-line canister filter/water separator with water detection

Air cleaner

Mann and Hummell P0037

Type

Multiport injection from pressure regulated, returnless supply

Pump

Electric submersible

Regulated pump output pressure

3.5 bar (50.75 lbf.in

2

Fuel pump delivery

120 litres/hr (211 pints/hr) (234 US pints/hr)

Filter

In-line canister

Air filter 

Mann and Hummell P0036

Cooling system - Td5 > < Engine - V8|Page 75