Discovery II
LIGHTING
REPAIRS 86-2-13
Switch - hazard warning
$% 86.65.50
Remove
1. Carefully remove switch.
2. Disconnect multiplug from switch.
3. Remove switch.
Refit
1. Connect multiplug switch.
2. Position switch and push to secure.
Switch - indicator and exterior lighting -
combined
$% 86.65.55
WARNING: Always remove the key from the
starter switch, disconnect the vehicle battery and
wait 10 minutes before commencing work on the
SRS system.
Remove
1. Remove rotary coupler.
2. Remove 2 screws securing switch.
3. Carefully raise edge of switch bracket to clear
location peg and release switch from bracket.
4. Disconnect 2 multiplugs and remove switch.
Refit
1. Position switch and connect multiplugs.
2. Fit switch to bracket and secure with screws.
3. Fit rotary coupler.