Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)23 · Restraint systems
23 · Body & interior

Rotary coupler

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Repairs › Rotary coupler
Restraint systemsRotary coupler

Refit

NOTE: If the airbag module is to be replaced, the bar code of the new module must be recorded.

  1. Position airbag to fascia, connect multiplug and multiplug holder.
  2. Align airbag to fascia and tighten torx screws to 9 Nm.
  3. Position airbag lower finisher and tighten screws.
  4. Connect battery leads, earth lead last.

ROTARY COUPLER

Service repair no - 76.74.20

Remove

WARNING: See GENERAL INFORMATION, SRS Precautions.

  1. Make the SRS system safe. See GENERAL INFORMATION, SRS Precautions.

CAUTION: Ensure front road wheels are in the straight ahead position.

  1. Remove steering wheel. See STEERING, Repairs.
Rotary coupler – Remove steering wheel. See STEERING, Repairs.
  1. Remove 2 screws securing lower half of steering column nacelle.
  2. Remove lower and upper halves of nacelle.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.