Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)23 · Restraint systems
23 · Body & interior

Seat belt - centre - rear - 5 door

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Repairs › Seat belt - centre - rear - 5 door
Restraint systemsSeat belt - centre - rear - 5 door

SEAT BELT - CENTRE - REAR - 5 DOOR

Service repair no - 76.73.20

Remove

  1. Remove RH rear seat. See BODY, Seats and seat belts.
Seat belt - centre - rear - 5 door – Remove RH rear seat. See BODY, Seats and seat belts.
  1. Remove 2 screws and remove seat belt reel cover.
Seat belt - centre - rear - 5 door – Remove 2 screws and remove seat belt reel cover.
  1. Remove nut and release seat belt reel.
Seat belt - centre - rear - 5 door – Remove nut and release seat belt reel.
  1. Remove 5 screws and remove both end covers from seat hinges.
  2. Remove 3 Torx bolts and remove squab from cushion.
Seat belt - centre - rear - 5 door – Remove 3 Torx bolts and remove squab from cushion.
  1. Release rear of cushion cover from seat frame.
  2. Release sides and front of cushion cover from seat frame.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.