Models without passenger airbag:

35. Fit fascia and coin tray mats to replacement fascia. Ensure mats are fully located in position.
36. Fit spire nuts and harness clips.
37. Fit switch blank.
38. Fit glove box locks and secure with screws.
39. Fit glove box and secure with screws.
40. Fit glove box lamp and mat.
41. Fit glove box lids and secure hinge pins.
42. Position seals to face level vents and fit vents.
43. Fit centre bracket and secure with screws.

Models without passenger airbag:

44. Fit grab handle and secure with nuts.

Models with passenger airbag:

45. Fit airbag lower finisher and secure with screws.

All models:

46. Fit instrument pack lower cover and secure with screws.
47. Fit instrument pack and secure with screws.
48. Position harness and secure harness in clips.
49. Fit mirror and headlamp leveling switches.
50. Feed harness through fascia and connect multiplugs to instrument pack, mirror switch and headlamp leveling switch.
51. Connect Lucars to glove box lamp and switch.
52. Fit instrument upper cover and secure with screws.
53. Position instrument bezel finisher, connect multiplugs and secure finisher with screws.

Refit

1. With assistance position fascia.
2. Fit and tighten screws.

Models without passenger airbag:

3. Fit fascia stowage box. See this section.

Models with passenger airbag:

4. Fit passenger airbag. See RESTRAINT SYSTEMS, Repairs.

All models:

5. Fit ’A’ post finishers. See this section.
6. Fit clock. See ELECTRICAL, Repairs.
7. Open driver’s glove box lid and connect multiplugs to fuse box.
8. Fit fuse box cover and close glove box lid.
9. Fit steering column lower finisher and secure with screws.
10. Fit wiper/indicator switch and tighten clamping screw.
11. Connect multiplugs to wiper/indicator switch.
12. Fit rotary coupler. See RESTRAINT SYSTEMS, Repairs.
13. Fit front console See this section.