L322 Range Rover Service Procedures
AIR CONDITIONING
82-6
REPAIRS
2. Rotate tensioner to fully tension compressor
drive belt.
NOTE: Make sure compressor drive belt is fully
seated in pulley grooves.
3. Tighten 2 bolts securing compressor drive belt
tensioner to 25 Nm (18 lbf.ft).
4. Fit undertray.
5. Connect battery earth lead.
Compressor - Td6
$% 82.10.20
Before disconnecting the battery, ensure all text and
cautions in the battery disconnection section are
observed.
GENERAL INFORMATION, Electrical
Remove
1. Raise front of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Disconnect battery earth lead.
3. Recover refrigerant from A/C system.
RECOVERY, RECYCLING AND
RECHARGING, Refrigerant recovery -
recycling and recharge.
NOTE: Receiver drier need only be changed
under the following circumstances. There is dirt
in the refrigerant circuit ( e.g. compressor
seizure ). The system is leaking and refrigerant
has been lost to atmosphere. Refrigerant
circuit has been open more than 24 hours due
to repair.
4. Remove turbocharger intake duct.
Td6, REPAIRS, Duct- intake - turbocharger.
5. Remove viscous coupling.
6. Remove compressor drive belt.