L322 Range Rover Service Procedures
AIR CONDITIONING
REPAIRS
82-5
Tensioner - compressor drive belt - Td6
$% 82.10.05
Remove
1. Remove compressor drive belt.
Drive belt - compressor - Td6.
2. Remove Allen bolt securing pulley arm to
spring tensioner, withdraw arm assembly.
3. Remove 2 bolts securing tensioner to
mounting, noting fitted position remove
tensioner.
Refit
1. Position tensioner, fit bolts and tighten to 25
Nm (18 lbf.ft).
2. Fit tensioner arm assembly and tighten Allen
bolt to 10 Nm (7 lbf.ft).
3. Fit compressor drive belt.
Drive belt - compressor - Td6.
Tensioner - compressor drive belt - V8
$% 82.10.05
Before disconnecting the battery, ensure all text and
cautions in the battery disconnection section are
observed.
GENERAL INFORMATION, Electrical
Remove
1. Position vehicle on lift.
2. Disconnect battery earth lead.
3. Remove undertray.
4. Loosen 2 compressor drive belt tensioner
securing bolts.
5. Remove 2 bolts securing compressor drive belt
tensioner and remove tensioner.
Refit
1. Position compressor drive belt tensioner, fit 2
bolts and tighten to 25 Nm (18 lbf.ft).
M82 0738