L322 Range Rover Service Procedures
ENGINE MANAGEMENT SYSTEM - V8
REPAIRS 18-2-23
Sensor - brake pedal position
$% 19.75.35
Remove
1. Release brake pedal position sensor from
holder, disconnect multiplug and remove
sensor.
2. Remove holder from pedal bracket.
Refit
1. Fit holder to pedal bracket.
2. Position brake pedal position sensor, connect
multiplug and secure to holder.
3. With brake pedal released, ensure brake pedal
position sensor is in contact with operating tang
on brake pedal.
4. If a replacement sensor has been fitted, re-set
adaptions using TestBook/T4.
