L322 Range Rover Service Procedures
ENGINE MANAGEMENT SYSTEM - V8
18-2-10 REPAIRS
Sensor - camshaft position (CMP) - RH
$% 18.30.26
Before disconnecting the battery, ensure all text and
cautions in the battery disconnection section are
observed.
GENERAL INFORMATION, Electrical
Remove
1. Disconnect battery earth lead.
2. Remove air intake hose.
V8, REPAIRS, Hose - air flow meter to
throttle body.
3. Cut 3 cable ties to release CMP sensor
harness.
4. Disconnect multiplug from CMP sensor.
5. Remove bolt securing CMP sensor and remove
sensor. Discard 'O' ring.
Refit
1. Clean CMP sensor and mating face.
2. Fit new 'O' ring.
3. Fit CMP sensor, fit bolt and tighten to 10 Nm (7
lbf.ft).
4. Secure CMP sensor harness with 3 cable ties.
5. Connect multiplug to CMP sensor.
6. Connect air intake hose.
V8, REPAIRS, Hose - air flow meter to
throttle body.
7. Connect battery earth lead.
8. If a replacement sensor has been fitted, re-set
adaptions using TestBook/T4.
M86 5760
M86 5747