L322 Range Rover Service Procedures
GENERAL INFORMATION
03-16
Heat protection
Always ensure that heatshields and protective
sheathing are in good condition. Replace if damage
is evident. Particular care must be taken when
routing hoses close to hot engine components, such
as the exhaust manifold and the Exhaust Gas
Recirculation (EGR) pipe. Hoses will relax and
deflect slightly when hot; ensure this movement is
taken into account when routing and securing hoses.
Service Tools
Special service tools have been developed to
facilitate removal, dismantling and assembly of
mechanical components in a cost effective and time
efficient manner. The use of such special tools also
helps prevent the potential for damage to
components. Service tools may be obtained from:
All orders and enquiries from the United Kingdom
and European countries except Germany, Austria,
Switzerland and Spain and countries not in the
following list should be sent direct to :
SPX UK Ltd;
Genoa House,
Everdon Park,
Daventry,
Northants,
NN11 5YJ.
England,
(
00 44 (0) 1327 303467 / 303455
)
00 44 (0) 1327 706632
e-mail: [email protected]
Overseas orders for the following countries should
be placed with the local SPX distributor.
Germany, Austria and Switzerland
SPX Europe GMBH,
Porchestrasse 4,
63512 Hainburg,
Germany
(
00 49 61829590
)
00 49 6182959299
Spain
SPX Iberica SA,
C/Francisco Aritio,
158 nave 72 (Nudo Oeste)
19004 Guadalajara,
Spain
(
00 34 949208381
)
00 34 949208327