L322 Range Rover Service Procedures
WIPERS AND WASHERS
84-10
REPAIRS
Motor - wiper - tailgate
$% 84.35.12
Remove
1. Remove rear wiper arm.
2. Disconnect washer hose from wiper motor.
3. Disconnect multiplugs from wiper motor.
4. Remove 3 Torx screws securing rear wiper
motor to tailgate.
5. Release motor from glass seal, remove motor
assembly.
6. Remove seal from glass.
NOTE: Do not carry out further dismantling if
component is removed for access only.
7. Remove compression limiters from wiper motor
rubber mountings, release and collect
mounting rubbers.
Refit
1. Fit mounting rubbers and insert compression
limiters.
2. Fit new glass seal.
3. Position wiper motor assembly to tailgate, fit
and tighten Torx screws to 10 Nm (7 lbf.ft).
4. Connect multiplugs.
5. Connect washer hose to wiper motor.
6. Fit wiper arm.
M84 0407