L322 Range Rover Service Procedures
WIPERS AND WASHERS
84-6
REPAIRS
Motor - wiper
$% 84.15.12
Before disconnecting the battery, ensure all text and
cautions in the battery disconnection section are
observed.
GENERAL INFORMATION, Electrical
Remove
1. Disconnect battery earth lead.
2. Noting fitted position, remove nut securing
windscreen wiper linkage and release linkage
from motor.
3. Remove 3 bolts securing mounting plate to
wiper motor.
4. Disconnect multiplug from motor.
5. Remove motor.
Refit
1. Position wiper motor to bracket, fit bolts and
tighten to 10 Nm (7 lbf.ft)
2. Connect multiplug to motor.
3. Connect battery earth lead.
4. Turn ignition key to position ll, ensure wiper
motor is in park, turn ignition off.
5. Disconnect battery earth lead.
6. Position wiper linkage to motor, fit nut and
tighten to 25 Nm (7 lbf.ft)
CAUTION: Ensure wiper motor is timed with
wiper linkage.
7. Connect battery earth lead.
Relay - wiper delay
$% 84.15.37
Remove
1. Remove battery.
2. Release clips securing ECU cover to bulkhead.
Remove cover.
3. Disconnect relay and multiplug from bulkhead
fuse box.
Refit
1. Connect relay to bulkhead fuse box mounting.
2. Fit and secure ECU cover.
3. Fit battery.
M84 0404