L322 Range Rover Service Procedures
WIPERS AND WASHERS
84-8
REPAIRS
Motor - wiper - headlamp
$% 84.25.12
Remove
1. Remove front bumper assembly.
2. Remove headlamp assembly.
3. Disconnect multiplug and hose from headlamp
wiper motor.
4. Release harness from front panel.
5. Remove 3 bolts securing bumper support
bracket and remove bracket.
6. Remove 2 bolts securing wiper motor retaining
bracket, remove bracket and motor assembly.
7. Remove 2 screws and release wiper motor
from bracket.
Refit
1. Position wiper motor to bracket and secure with
screws.
2. Fit motor assembly, fit and tighten bolts to 10
Nm (7 lbf.ft).
3. Fit bumper support bracket, fit and tighten bolts
to 10 Nm (7 lbf.ft).
4. Secure harness to front panel, connect
multiplug and hose to motor.
5. Fit headlamp assembly.
6. Fit front bumper assembly.
M84 0423