LT230 Transfer Box Overhaul: Differential Upgrade
TRANSFER BOX
OVERHAUL
15
Differential
1. Secure differential in a soft-jawed vice.
2. Remove staking from bearing retaining nut.
3. Remove nut using tool LRT-41-007; discard
nut.
4. Secure hand press LRT-99-002 in a vice.
5. Secure collars LRT-41-001 around rear
bearing.
NOTE: This bearing is adjacent to
threaded end of differential shaft.
6. Position differential in hand press with thrust
button, part of tool LRT-41-001 between press
mandrel and differential shaft.
7. Press differential out of bearing.
CAUTION: Take care that differential does
not drop out of bearing.
8. Remove differential from press, discard
bearing.
