Workshop Manuals Factory service & repair Land Rover
01 LT230T Transfer box Overhaul Manual - 3rd Edition02 03 04 05 INTRODUCTION06 07 08 TRANSFER BOX
Land Rover LT230 Transfer Box08 · TRANSFER BOX
08 · General

Front output housing (page 2 of 2)

Make
Land Rover
Model
Gearboxes LT230 Transfer Box
Section
OVERHAUL
TRANSFER BOXFront output housing · page 2 of 2
Front output housing (page 2 of 2) – Land Rover LT230 Transfer Box

TRANSFER BOX

OVERHAUL

35

5. Lubricate a new output shaft oil seal with

recommended oil.

6. Fit oil seal using tool LRT-41-012.

NOTE: Use end of tool marked ’FRONT’ to
fit oil seal.

7. Check that oil seal is just contacting circlip.
8. Position selected shim in front output housing.

9. Fit differential front bearing track using tool

LRT-54-003.

10. Fit bearing spacer to output shaft ensuring that

chamfer on spacer is towards threaded end of
shaft.

11. Fit dog clutch ensuring that flange on clutch is

towards splined end of shaft.

12. Using a mallet, drive output shaft into bearing.

Parts & tools for this job For Land Rover Gearboxes

As an Amazon Associate we earn from qualifying purchases.