Range Rover P38
PANEL REPAIRS
7
REPAIR
’BC’ POST INNER PANELS
Remove
1. Disconnect both battery leads, negative lead
first.
2. Raise side of vehicle.
WARNING: Support on safety stands.
3. Disconnect all ECUs.
4. Disconnect airbags and sensor system.
5. Disconnect alternator.
6. Remove front seat.
See CHASSIS AND BODY,
Repair.
7. Remove seat belt - front.
See CHASSIS AND
BODY, Repair.
8. Remove front seat belt adjustable mounting.
See CHASSIS AND BODY, Repair.
9. Remove ’BC’ post trim.
See CHASSIS AND
BODY, Repair.
10. Remove rear door assembly.
See CHASSIS
AND BODY, Repair.
Refit
NOTE: In this operation, the inner panels
are replaced in combination with a ’BC’
post reinforcement and repair panel.
11. Prepare and clean panel joint faces. Punch or
drill holes in new ’BC’ post inner panels for plug
welding as shown.
12. Reverse removal procedure.
13. Remove stands and lower vehicle.
