Range Rover P38
77
PANEL REPAIRS
NEW RANGE ROVER
8
REPAIR
ROOF ASSEMBLY
Remove
1. Disconnect both battery leads, negative lead
first.
2. Disconnect all ECUs.
3. Disconnect airbags and sensor system.
4. Disconnect alternator.
5. Remove headlining - sliding roof.
See CHASSIS
AND BODY, Repair.
6. Remove sliding roof - electric.
See CHASSIS
AND BODY, Repair.
7. Remove windscreen.
See CHASSIS AND
BODY, Repair.
8. Remove front door assembly.
See CHASSIS
AND BODY, Repair.
9. Remove rear door assembly.
See CHASSIS
AND BODY, Repair.
10. Remove tailgate - upper.
See CHASSIS AND
BODY, Repair.
11. Remove seat belt - front.
See CHASSIS AND
BODY, Repair.
12. Remove front seat belt adjustable mounting.
See CHASSIS AND BODY, Repair.
13. Remove ’A’, ’BC’, ’D’ and ’E’ post trims.
See
CHASSIS AND BODY, Repair.
14. Remove sunroof drain tube - front.
See
CHASSIS AND BODY, Repair.
15. Remove sunroof drain tube - rear.
See
CHASSIS AND BODY, Repair.
Refit
16. Prepare and clean panel joint faces. Punch or
drill holes in new roof assembly for plug welding
as shown.
WARNING: Remove ALL traces of
adhesive from joints to cantrail front and
rear corners before plug welding.
17. Reverse removal procedure.