Range Rover P38
76
CHASSIS AND BODY
NEW RANGE ROVER
66
REPAIR
SLIDING ROOF - ELECTRIC
Service repair no - 76.82.44
Remove
1. Remove headlining.
See this section.
2. Disconnect motor multiplug.
3. Disconnect sliding roof drain tubes.
4. Remove 8 bolts securing sliding roof.
5. With assistance, remove 2 remaining bolts.
Remove sliding roof.
6. Remove seal from sliding roof.
Refit
7. Ensure mating faces are clean.
8. Fit new seal to sliding roof.
9. With assistance, position sliding roof. Fit 2 bolts.
10. Fit remaining bolts.
11. Connect drain tubes. Secure with clips.
12. Connect motor multiplug.
13. Refit headlining.
See this section.