Range Rover P38
CHASSIS AND BODY
65
REPAIR
Refit
12. Fit stalk to seat pan. Secure with bolt, spacers
and wave washer. Tighten to
35 Nm. (26 lbf.ft)
13. Fit seat belt anchorage cover. Secure with
screws.
14. Fit cushion assembly to seat pan. Secure
beaded edge of cover to seat pan flange.
15. Fit stalk to squab hinge. Secure with bolt.
Tighten to
35 Nm. (26 lbf.ft)
16. Position seat squab to cushion assembly.
Secure with bolts. Tighten to
45 Nm. (33 lbf.ft)
17. Refit squab hinge cover. Secure with screws.
18. Refit rear seat assembly.
See SEATS, Repair.
19. Position belt to upper anchorage point. Secure
with nut. Tighten to
25 Nm. (18 lbf.ft). Fit
cover.
20. Position seat belt reel. Secure with bolt. Tighten
to
35 Nm. (26 lbf.ft)
21. Fit ’D’ post lower trim.
22. Fit parcel shelf support trim.
See this section.
