SEAT BELT - FRONT - UP TO 99MY
- Make
- Land Rover
- Model
- Range Rover P38
- Section
- REPAIR › SEAT BELT - FRONT - UP TO 99MY
CHASSIS AND BODY
57
REPAIR
’E’ POST - EXTERIOR TRIM
Service repair no - 76.43.
Remove
1. Open upper tailgate.
2. Remove 3 screws securing trim to ’E’ post.
3. Remove trim.
Refit
4. Position trim to ’E’ post, engage slot beneath
special washer on tailgate strut ball joint and
engage channel to rear edge of quarter glass.
5. Secure trim with screws.
6. Close tailgate.
SEAT BELT - FRONT - UP TO 99MY
Service repair no - 76.73.13
Remove
1. Remove lower ’B’ post finisher.
2. Remove cover and nut securing seat belt to
upper anchorage point.
3. Release seat belt guide from ’B’ post.
4. Move seat fully forwards.
5. Remove bolt cover. Release seat belt from lower
anchorage point on seat.
Parts & tools for this job For Land Rover Range Rover
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.