Starting and charging – fault diagnosis

STARTING AND CHARGING – FAULT DIAGNOSIS

TROUBLESHOOTING HINTS

1. If the Starter Solenoid (K136) does not click and the vehicle is equipped with a memory seat, check seat operation. If the seat does not operate, check the Park/Neutral Position Switch (X167) and the Theft Alarm Unit (Z163).

SYSTEM DIAGNOSIS

1. If the Starter Solenoid (K136) does not click and the engine does not crank, do Test A. 2. If the Starter Solenoid (K136) clicks but the engine does not crank or cranks slowly, do Test B. 3. If the charge warning light does not light with the engine off and the Ignition Switch (X134) in position II, do Test C. 4. If the charge warning light stays lit with the engine running, do Test D.

E L E C T R I C A L

STARTING AND CHARGING

T R O U B L E S H O O T I N G M A N U A L

7