FRONT BRAKE DISCS
- Make
- Land Rover
- Model
- Range Rover Classic
- Section
- REPAIR › FRONT BRAKE DISCS
54
FRONT AXLE AND FINAL DRIVE
2
REPAIR
FRONT BRAKE DISCS
Service repair no - 70.10.10.
Remove
See Front Hub
Assembly
2. Remove five hub to disc bolts.
3. Tap disc to separate from hub.
Refit
4. Locate disc to hub.
5. Apply Loctite 270 to disc bolts. Tighten to
73
Nm.
6. Check total disc runout with a dial indicator, this
must not exceed 0,15 mm. If necessary
reposition disc.
7. Fit hub assembly.
See Front Hub Assembly
Disc reclamation
8. Check disc thickness. This dimension may be
reduced to minimum thickness of 12 mm.
Machine equal amount off each face.
Parts & tools for this job For Land Rover Range Rover
- PARTFront brake padsSearch: Land Rover Range Rover front brake pads
- TOOLCaliper piston rewind toolSearch: brake caliper piston rewind tool
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.