Range Rover Classic
AIR SUSPENSION
9
DESCRIPTION AND OPERATION
SYSTEM FUNCTION
The following table indicates conditions required for various air suspension modes.
NOTE: That the engine must be running unless indicated, and that ACCESS may be selected for 15
seconds after switching engine off.
Function
Condition
Warning
lamp
on
1.
Automatic functions - Inhibit switch OFF.
High profile to standard
Over 56kph (35mph)
No
Standard to low profile
Over 80kph (50 mph) for 30 secs
Lower
Low profile to standard
Below 56kph (35 mph) for 30 secs
No
(but above 1.6 kph (1 mph))
Access to standard
Park brake off or drive away
No
2.
Driver select functions - Inhibit switch OFF.
Standard to high profile
Raise switch below 56kph (35 mph)
Raise
High profile to standard
Lower switch below 56kph (35 mph)
No
Standard to access
Lower switch
)Stationary/
Lower
)park brake on
Low profile to access
Lower switch
)- manual/
Lower
(where vehicle has not returned to standard
)transmission P
)- automatic/
High to Access
Press lower switch twice
)doors shut
Lower
Access to standard
Raise switch
Lower
Access to high
Press raise switch twice
Raise
3.
Inhibit switch ON
High profile to standard
Below 56kph (35 mph)
Inhibit
Low profile to standard
Inhibit
Access to standard
Stationary/park brake on
Inhibit
4.
Self levelling
Vehicle levelling for 20
Stationary/engine off/
No
secs, and every 6 hrs
exit vehicle