Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)05 · Driveline and axles
05 · Transmission

Drive pinion component disassembly note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Differential › Drive pinion component disassembly note
Driveline and axlesDrive pinion component disassembly note
DRIVELINE/AXLES – Differential – figure
Fig. 21: Removing Companion Flange Using SST
Courtesy of MAZDA MOTORS CORP.

DRIVE PINION COMPONENT DISASSEMBLY NOTE

  1. Install the removed locknut to the drive pinion top to prevent damage to the thread.
  2. Remove the drive pinion component by tapping the locknut lightly using a plastic hammer.
  3. Remove the locknut installed in Step 1.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.