Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)05 · Driveline and axles
05 · Transmission

Washer table

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Differential › Washer table
Driveline and axlesWasher table

one of the pinion gear teeth.

DRIVELINE/AXLES – Differential – figure
Fig. 26: Installing Dial Gauge
Courtesy of MAZDA MOTORS CORP.
  1. Fix either one of the side gears.
  2. Move the pinion gear and measure the backlash at the pinion gear top.
    • If it is not within the specification, adjust by choosing the proper washer.

Backlash of pinion gear and side gear

0.1 mm {0.004 in} or less

WASHER TABLE

Identification markPart nameThickness (mm {in})
9MA29 27 2520.90 {0.0354}
95MA29 27 2530.95 {0.0374}
0MA29 27 2541.00 {0.0393}
05MA29 27 2561.05 {0.0413}
1MA29 27 2571.10 {0.0433}

ROLL PIN ASSEMBLY NOTE

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.