Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

After service precaution [lf]

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System › After service precaution [lf]
EngineAfter service precaution [lf]
ENGINE – Fuel System – figure
Fig. 4: Removing Fuel Pump Relay
Courtesy of MAZDA MOTORS CORP.
  1. Start the engine.
  2. After the engine stalls, crank the engine several times .
  3. Turn the ignition switch to the LOCK position.
  4. Install the fuel pump relay.

AFTER SERVICE PRECAUTION [LF]

WARNING: Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the Fuel Leakage Inspection.

FUEL LEAKAGE INSPECTION

WARNING: Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, complete the following inspection with the engine stopped.

Using M-MDS or Equivalent

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.