Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Fuel tank inspection [lf]

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System › Fuel tank inspection [lf]
EngineFuel tank inspection [lf] · page 1 of 2
ENGINE – Fuel System – figure
Fig. 17: Installing Joint Hose & Clamp
Courtesy of MAZDA MOTORS CORP.
  1. Install the clamp between the spool and stopper without overlapping the stopper.

FUEL TANK INSPECTION [LF]

NOTE: The two rollover valves built into the fuel tank and check valves (two-way) built into the rollover valves are inspected in this inspection.

  1. Follow "BEFORE SERVICE PRECAUTION" before performing any work operations to prevent fuel from spilling from the fuel system. (See BEFORE SERVICE PRECAUTION [LF] .)

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.