Resistance inspection
- Make
- Mazda
- Model
- MX-5 (NC) Factory Workshop Manual
- Year
- 2006–2008
- Section
- Fuel System › Resistance inspection
EngineResistance inspection
- Perform the following inspection only when directed.
RESISTANCE INSPECTION
- Remove the battery cover.
- Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
- Disconnect the fuel injector connector.
- Inspect the resistance between fuel injector terminals A and B using a tester.
- If within the specification, perform the CIRCUIT OPEN/SHORT INSPECTION.
- If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [LF] .)
Fuel injector resistance
11.4-12.6 ohms [20°C {68°F}]
Parts & tools for this job For 2006 Mazda MX-5
- PARTFuel filterSearch: Mazda MX-5 2006 fuel filter
- TOOLFuel pressure test kitSearch: fuel pressure test kit
- TOOLFuel line disconnect toolSearch: fuel line disconnect tool
As an Amazon Associate we earn from qualifying purchases.