Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Fuel static pressure inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System › Fuel static pressure inspection
EngineFuel static pressure inspection

See also: live page (the same text is also in the 2008 2.0L manual)

ENGINE – Fuel System – figure
Fig. 28: Identifying Fuel Pump Unit Terminal
Courtesy of MAZDA MOTORS CORP.

FUEL STATIC PRESSURE INSPECTION

NOTE: The fuel static pressure inspection cannot be performed because the pressure regulator is integrated with the fuel pump unit.

QUICK RELEASE CONNECTOR (FUEL SYSTEM) REMOVAL/INSTALLATION [LF]

WARNING: Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the "FUEL LINE SAFETY PROCEDURE", while referring to the BEFORE SERVICE PRECAUTION [LF] .

QUICK RELEASE CONNECTOR TYPE

CAUTION: There are two types of quick release connectors. Verify the type and location, and install/remove properly.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.