Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Fuel tank removal note

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System › Fuel tank removal note
EngineFuel tank removal note · page 1 of 2

FUEL TANK REMOVAL NOTE

  1. Move the dust cover slightly out of the way.
  2. Move the charcoal canister slightly out of the way. (See CHARCOAL CANISTER REMOVAL/INSTALLATION [LF] .)

INSULATOR REMOVAL NOTE

CAUTION: Be careful not to damage the fuel tank when removing the rivet. If the fuel tank is damaged, it may cause fuel leakage.

NOTE: The insulator is installed using rivets.

When reinstalling the rivet, install the same rivet or M5 bolt and nut.

  1. Push out the mandrel using a hammer and punch (2-2.8 mm {0.08-0.11 in} diameter).

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.