Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Circuit open/short inspection

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System › Circuit open/short inspection
EngineCircuit open/short inspection
ENGINE – Fuel System – figure
Fig. 27: Disconnecting Fuel Pump Unit Connector
Courtesy of MAZDA MOTORS CORP.
  1. Inspect for continuity between fuel pump unit terminals B and D.
    • If there is continuity, perform the CIRCUIT OPEN/SHORT INSPECTION.
    • If there is no continuity, replace the fuel pump. (See FUEL PUMP UNIT DISASSEMBLY/ASSEMBLY [LF1] .)

CIRCUIT OPEN/SHORT INSPECTION

  1. Inspect the following wiring harnesses for an open or short circuit (continuity check).

Open circuit

  • If there is no continuity, the circuit is open. Repair or replace the harness.
  • Fuel pump unit terminal D and body ground

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.