Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Open Circuit

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System › Open Circuit
EngineOpen Circuit · page 1 of 5

Open Circuit

  • If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
  • Fuel injector No.1 terminal B and PCM terminal 2BB
  • Fuel injector No.2 terminal B and PCM terminal 2BC
  • Fuel injector No.3 terminal B and PCM terminal 2BD
  • Fuel injector No.4 terminal B and PCM terminal 2AZ
  • Fuel injector No.1 terminal A and main relay
  • Fuel injector No.2 terminal A and main relay
  • Fuel injector No.3 terminal A and main relay
  • Fuel injector No.4 terminal A and main relay

Short Circuit

  • If there is continuity, there is a short circuit. Repair or replace the wiring harness.
  • Fuel injector No.1 terminal B and body ground
  • Fuel injector No.1 terminal B and power supply
  • Fuel injector No.2 terminal B and body ground
  • Fuel injector No.2 terminal B and power supply
  • Fuel injector No.3 terminal B and body ground
  • Fuel injector No.3 terminal B and power supply
  • Fuel injector No.4 terminal B and body ground
  • Fuel injector No.4 terminal B and power supply
  • Fuel injector No.1 terminal A and body ground
  • Fuel injector No.2 terminal A and body ground
  • Fuel injector No.3 terminal A and body ground
  • Fuel injector No.4 terminal A and body ground

LEAKAGE INSPECTION

WARNING: Fuel line spills and leakage from the pressurized fuel system are dangerous. Fuel can ignite and cause serious injury or death and damage. To prevent this, complete the following inspection with the engine stopped.

  1. Follow "BEFORE SERVICE PRECAUTION" before performing any work operations to prevent fuel from spilling from the fuel system. (See BEFORE SERVICE PRECAUTION [LF] .)
  2. Remove the battery cover.
  3. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  4. Remove the fuel injector and fuel distributor as a single unit. (See FUEL INJECTOR

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.