Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Open Circuit (page 5 of 5)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System
EngineOpen Circuit · page 5 of 5
ENGINE – Fuel System – figure
Fig. 47: Identifying F/P Connector Terminal
Courtesy of MAZDA MOTORS CORP.
  1. Turn the ignition switch to the ON position to operate the fuel pump.

NOTE: Prepare a container to collect the gasoline.

  1. Tilt the fuel injector at an angle of 24° to inspect for leakage.
    • If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [LF] .

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.