Workshop Manuals Factory service & repair Mazda
01 General information02 Engine03 Engine performance04 Transmission05 Driveline and axles06 Suspension07 Brakes08 Steering09 Restraints10 Heating and air conditioning11 Electrical12 Accessories and equipment13 Body and cab accessories
Mazda MX-5 (NC) Factory Workshop Manual (2006-2008)02 · Engine
02 · Engine

Fuel tank inspection [lf] (page 2 of 2)

Make
Mazda
Model
MX-5 (NC) Factory Workshop Manual
Year
2006–2008
Section
Fuel System
EngineFuel tank inspection [lf] · page 2 of 2
  1. Remove the battery cover.
  2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [LF] .)
  3. Remove the fuel tank with the fuel pump unit. (See FUEL TANK REMOVAL/INSTALLATION [LF] .)
  4. Perform the following procedure to verify the fuel tank airtightness.
  5. Plug the fuel pump unit pipe, port B and port C.
ENGINE – Fuel System – figure
Fig. 18: Identifying Plug Fuel Pump Unit Pipe & Ports
Courtesy of MAZDA MOTORS CORP.
  1. Apply a pressure of 3 kPa {23 mmHg, 0.9 inHg} to port A and wait for a while.
  2. Verify that there is no air leakage from the fuel tank.
    • If there is airflow, replace the fuel tank.
  3. Plug the fuel pump unit pipe and port B.

Parts & tools for this job For 2006 Mazda MX-5

As an Amazon Associate we earn from qualifying purchases.