Workshop Manuals Factory service & repair MG
01 Introduction02 General information03 General data, torque settings and capacities04 Maintenance05 Engine (K Series)06 Engine management (MEMS 3), fuel and emission systems07 Cooling system08 Manifolds and exhaust system09 Clutch10 Manual gearbox11 Automatic gearbox (Stepspeed Em-CVT)12 Drive shafts13 Steering14 Front suspension15 Rear suspension16 Brakes17 Restraint systems (SRS)18 Body19 Heating and ventilation20 Air conditioning21 Wipers and washers22 Electrical23 Instruments
MG TF Factory Workshop Manual (2002-2005)18 · Body
18 · Body & interior

Front console

Make
MG
Model
TF Factory Workshop Manual
Year
2002–2005
Section
Interior trim components › Front console
BodyFront console

FRONT CONSOLE

Service repair no - 76.25.01

WARNING: See GENERAL INFORMATION, SRS Precautions.

Remove

  1. Make SRS system safe. See GENERAL INFORMATION, SRS Precautions.
  2. Remove centre console panel. See this section.

CAUTION: Ensure pre-tensioner multiplug is disconnected before seat is removed.

  1. Remove rear console. See this section.
  2. Remove both console closing panels. See this section.
Front console – Remove both console closing panels. See this section.
  1. Remove 6 screws securing console to tunnel.
Front console – Remove 6 screws securing console to tunnel.
  1. Loosen handbrake adjustment and position hand brake lever in ON position.
  2. Release handbrake gaiter from console and remove gaiter from handbrake.
  3. Release console and disconnect multiplug from cigar lighter.
  4. Release volumetric sensor cable and remove console.

Parts & tools for this job For 2002 MG TF

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.