Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)27 · Body
27 · Body & interior

Rear quarter rubbing strip

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Exterior fittings › Rear quarter rubbing strip
BodyRear quarter rubbing strip

REAR QUARTER RUBBING STRIP

Service repair no - 76.43.87

Remove

  1. Remove rear quarter lower trim casing. See Interior trim components.
Rear quarter rubbing strip – Remove rear quarter lower trim casing. See Interior trim components.
  1. Compress tags on 3 clips and release rubbing strip from rear quarter panel. Do not carry out further dismantling if component is removed for access only.
Rear quarter rubbing strip – Compress tags on 3 clips and release rubbing strip from rear quarter panel. Do not carry o
  1. Remove clips from rubbing strip by rotating and fit to new.

Refit

  1. Fit rubbing strip to rear quarter panel and secure with clips.
  2. Fit rear quarter lower trim casing. See Interior trim components.

FRONT TREAD PLATE

Service repair no - 76.76.01

Remove

Front tread plate – Service repair no - 76.76.01
  1. Remove 3 screws securing tread plate to sill.
  2. Release tread plate from door seal and remove.

Refit

  1. Fit tread plate to door sill and seal.
  2. Secure tread plate with screws.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.