Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)27 · Body
27 · Body & interior

Tailgate spoiler

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Exterior fittings › Tailgate spoiler
BodyTailgate spoiler

Refit

  1. Fit rear bumper to body.
  2. Fit bolt securing lower edge and tighten to 6 Nm.
  3. Fit screws securing ends of bumper to rear wing.
  4. Fit screws securing ends of bumper to wheel arch liners.
  5. Fit scrivets securing upper edge of bumper.

TAILGATE SPOILER

Service repair no - 76.10.93

Remove

  1. Remove tailgate upper finisher. See Interior trim components.
Tailgate spoiler – Remove tailgate upper finisher. See Interior trim components.
  1. Remove 4 bolts securing spoiler to tailgate.
Tailgate spoiler – Remove 4 bolts securing spoiler to tailgate.
  1. Lower tailgate and move spoiler aside to gain access to centre high mounted stop light multiplug.
  2. Disconnect centre high mounted stop light multiplug and remove spoiler.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.