Workshop Manuals Factory service & repair Rover
Rover 200 Workshop Manual (1995-1999)27 · Body
27 · Body & interior

Front seat and squab frame

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Seats and seat belts › Front seat and squab frame
BodyFront seat and squab frame · page 1 of 2

Refit

  1. Position squab cover, fit head restraint escutcheons and secure with clips.
  2. Pull cover to position and secure front with new hog rings.
  3. Pass cover hooks through cushion and secure to squab frame.
  4. Position cover and secure rear with new hog rings.
  5. Pass cover hooks under base of squab and secure to frame.
  6. Secure lower retainer to frame rear bar.
  7. Fit head restraint.
  8. Fit front seat. See this section.

FRONT SEAT AND SQUAB FRAME

Service repair no - 78.30.18

Remove

  1. Remove front squab cover. See this section.
Front seat and squab frame – Remove front squab cover. See this section.
  1. Remove front squab pad.
  2. Release spring clips and remove head restraint escutcheons from squab frame.
  3. Release 8 springs securing squab suspension to frame and remove suspension.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.