Workshop Manuals Factory service & repair Rover
01 Introduction02 Engine - L Series03 Emission control04 Engine management system - EDC05 Fuel delivery system - L Series06 Cooling system - L Series07 Clutch08 Automatic gearbox09 Steering10 Front suspension11 Brakes12 Body13 Air conditioning14 Electrical
Rover 600 Repair Manual Supplement (1993-1999)11 · Brakes
11 · Brakes

Brake system bleed - ABS 5 (Brakes) (page 2 of 2)

Make
Rover
Model
600 Repair Manual Supplement
Year
1993–1999
Section
Adjustments
BrakesBrake system bleed - ABS 5 · page 2 of 2
Diagram
  • Bleed sequence:
  • LH rear to RH rear
  • RH front to LH front
  1. Repeat procedure at each wheel in the sequence shown.
  • CAUTION: Braking efficiency may be
  • seriously impaired if wrong bleed
  • sequence is used.
  1. Remove bleed tube. Apply brakes and check for leakage.
  2. Remove stand(s) and lower vehicle.
  3. Road test vehicle and carry out 2 ABS invoked stops.
  4. Repeat bleed procedure.
  5. Check brake pedal for short firm travel when applied.
  6. Repeat bleed procedure if necessary.

Parts & tools for this job For 1993 Rover 600

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.