Drain and refill (Cooling system - L Series) (page 2 of 2)

Refill

13. Connect bottom hose to radiator and tighten clip.
14. Fit under belly panel. See BODY, Exterior fittings.
15. Prepare coolant to required concentration.
16. Fill system slowly through coolant expansion tank until the coolant reaches the ’MAX’ level indicator.
17. Fit coolant expansion tank cap.
18. Start and run engine until the radiator cooling fan operates. Do not operate the air conditioning system.
19. Switch off engine and allow to cool.
20. Check for coolant leaks and top-up coolant to ’MAX’ level indicator.