Refit

Refit

1. Position fan cowl, cooling fan and motor assembly to radiator ensuring fan cowl is located in clip.
2. Fit fan cowl securing nuts and tighten to 5 Nm.
3. Lubricate a new thermostatic switch seal with silicone grease and fit to radiator.
4. Fit thermostatic switch, fit and tighten locking ring.
5. Check radiator mounting rubbers for damage, replace if necessary.
6. Fit mounting rubbers and seating rings to radiator.
7. Position radiator.
8. Connect thermostatic switch multiplug.
9. Connect fan motor multiplug; secure multiplug to bracket.
10. Position mounting brackets to radiator and bonnet platform, fit bolts and tighten to 5 Nm.
11. Position earth leads to bonnet platform, fit and tighten bolt.
12. Connect top hose to radiator; tighten clip.
13. Fit air cleaner, see MODULAR ENGINE MANAGEMENT SYSTEM – MPi – Repairs.
14. Refill cooling system, see MAINTENANCE.