Workshop Manuals Factory service & repair Rover
Rover 200/400 Coupé, Cabriolet & Tourer Workshop Manual09 · Modular engine management system - SPi
09 · Engine

Remove

Make
Rover
Model
Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual
Section
Repairs › Remove
Modular engine management system - SPiRemove

Service Repair No. 18.30.10

Remove

Diagram showing the coolant temperature sensor multiplug (1) being disconnected from the sensor (2).
  1. Disconnect multiplug.
  2. Release sensor from inlet manifold.

Refit

  1. Wipe sensor threads and mating face.
  2. Fit and tighten coolant temperature sensor to 15 Nm.
  3. Connect multiplug to sensor.
  4. Top up cooling system, see MAINTENANCE

CRANKSHAFT SENSOR

Service Repair No. 18.30.12

Remove

Diagram showing the crankshaft sensor multiplug (1) and its securing screw (2) on a bracket.
  1. Release sensor multiplug from harness.
  2. Release screw securing sensor multiplug to bracket.
Diagram showing the crankshaft sensor secured by screws (3) to an adaptor plate (4).
  1. Release 2 screws securing sensor to adaptor plate.
  2. Remove sensor.

Refit

  1. Position sensor, fit screws and tighten to 6 Nm.
  2. Position sensor lead to bracket, fit screw and tighten to 6 Nm.
  3. Connect multiplug to harness.

Parts & tools for this job For Rover Coupé, Cabriolet & Tourer

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.